Kite, 2-Piece Wing

Type: Gliders

Due to the invasion of Ukraine where our models are produced, we do not have a clear date on when we will have these models back in stock. Please sign up to our newsletter for updates.


The Kite is an all-round DLG / F3K glider made for both leisure and competitive flying.

The Kite uses state-of-the-art production techniques to give it a very consistent and accurate surface finish, while the solid Rohacell core and carbon skin ensures stiffness at very light weights.

All four servos goes in the nose in an exposed layout, and the kit itself comes highly prefabricated. 

For convenience, the wing and stabilizer is removable via screws, and the wing is a 2-piece wing so its easy to ship and store. 


  • Solid Cascell core molded wing and tails
  • 1-piece fuselage
  • Nosecone
  • 2-piece wing (centre split)
  • Removable wing
  • Removable horizontal tail


    • Wingspan: 1490 mm
    • Wing area: 20 dm²
    • Wing Airfoils: Zone V2
    • Stabilizer Airfoil: Freak V2
    • Stabilizer Area: 2.15 dm²
    • Fin Airfoil: HT-23
    • Fin Area: 1.95 dm²
    • Standard Layup AUW: ~220 grams
    • Strong Layup AUW: ~250 grams
    • Right-handed models. If you need a left-handed model, please email us.
    • Left wing panel
    • Right wing panel
    • Fuselage
    • Nosecone
    • Horizontal tail
    • Vertical tail
    • Wing joiner
    • Pull-string wire
    • Crimp tubes for pull-string
    • Springs for tail
    • T-blade
    • Tail screws
    • Wing screws
    • Wing control horns
    • Elevator control horn
    • Rudder control horn
    • Wing hinge axis rod
    • Carbon fabric
    • Pre-bent pushrod ends
    • Carbon wing pushrods
    Recommended Gear:
    • Receiver: FrSky GR6, R6, Spektrum AR410
    • Servos (Wings): 2* KST A08 V6 or KST X08 V6
    • Servos (Tails)2* KST X06
    • Battery: 1S LiPo 350 mAh